According to the design requirements | Forum

Topic location: Forum home » General » General Chat
baka Mar 7

the grid cloth smooth, so close. Mesh horizontal overlap width of not less than 100, lap perpendicular to the length of not less than 80, lap joints with mortar to supplement the bottom of the vacancy mortar, mesh cloth shall not be pleated, hollowing, Alice edge. 5, at the concave and convex line angle, a narrow grid should be buried in the bottom of the polymer mortar, the entire grid in a narrow grid cloth, lap

width 80. 6, in the wall at both sides of the yin and yang corner of the two-way grid around the angle overlap lap, overlapping lap width of not less than 200. 7, Plastering polymer mortar After the bottom of the polymer mortar and pressed into the grid cloth, until the mortar to the surface of non-sticky solidified hands, began to plastering polymer mortar, plaster thickness to cover the grid Cloth shall

prevail.Cement fiber board, also known as fiber cement board. Is based on silicon, calcium-based materials, adding plant fibers, after pulping, copying, pressure and conservation made of a new type of building materials. Cement fiber board with fire insulation, waterproof moisture, thermal noise, light and high quality, construction and quarantine, economical and beautiful, completely harmless, long life and

high hardness decking material in india
replacing pine deck on boat
resist heat hardwood flooring supplier